The new fuel oil standard specifies what the moisture content is?
Moisture: Resistant fuel Oil Years of operating experience has shown that, in many cases, the increase in the acid value of oil during operation is caused by the hydrolysis of oil, so the new oil standard specifies that the value of <600 mg/L. The water standard for running oil is 1000 mg/L.
Moisture: test according to GB/T 7600 method. Moisture will not only lead to deterioration of hydrolysis of phosphate resistant fuel, increase of acid value, and cause corrosion of system components, but also affect the lubrication characteristics of oil. If the moisture content of the running phosphate resistant fuel exceeds the standard, the cause should be identified quickly and effective treatment measures should be taken.
SH103 micro moisture tester (produced by Shandong Sheng Tai Instrument Co., LTD.) is based on the principle of Karl Fischer Coulomb titration and controlled by microcomputer automatically. Compared with similar products at home and abroad, it has the advantages of high sensitivity, fast electrolysis speed, short balance time, accurate blank deduction and accurate and reliable analysis results. It is a high-quality analytical instrument for petroleum, chemical industry, electric power, environmental protection, medicine, scientific research and other departments. The instrument uses 32-bit embedded microprocessor as the main control core, embedded mini operating system; The instrument has constant current detection, double circuit balance titration function; The electrolytic cell adopts waterproof seal design; Support multiple calculation formulas, in line with the standard GBT11133 and ASTMD 0304.